Hi, I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message: error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m ex/octave\mjdgges.mex I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependents-td465 0258.html). Does anyone know which library might be missing? Best, Johannes ------ Johannes Pfeifer Department of Economics University of Mannheim L7, 3-5, Room 242 68131 Mannheim Germany +49 (0)621 181-3430
Unless somebody has changed something recently, Dynare for Windows is not currently linked against Octave 4.0 libraries but Octave 3.8 (or even earlier) I need to have Dynare Octave working with 4.0.3 for next week for a course. I was able to have simple mex files working by compiling them by hand with Octave 4.0.3. I will now look into the more complex libraries. Best Michel Johannes Pfeifer writes:
Hi,
I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message:
error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m
ex/octave\mjdgges.mex
I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependents-td465 0258.html). Does anyone know which library might be missing?
Best,
Johannes
------
Johannes Pfeifer
Department of Economics
University of Mannheim
L7, 3-5, Room 242
68131 Mannheim
Germany
+49 (0)621 181-3430
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard
Thanks Michel, let me know if I can assist you. I will try to look into the failing unit tests for Octave on Linux that Houtan identified. -----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Michel Juillard Gesendet: Montag, 3. Oktober 2016 08:57 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again) Unless somebody has changed something recently, Dynare for Windows is not currently linked against Octave 4.0 libraries but Octave 3.8 (or even earlier) I need to have Dynare Octave working with 4.0.3 for next week for a course. I was able to have simple mex files working by compiling them by hand with Octave 4.0.3. I will now look into the more complex libraries. Best Michel Johannes Pfeifer writes:
Hi,
I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message:
error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m
ex/octave\mjdgges.mex
I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependents -td465 0258.html). Does anyone know which library might be missing?
Best,
Johannes
------
Johannes Pfeifer
Department of Economics
University of Mannheim
L7, 3-5, Room 242
68131 Mannheim
Germany
+49 (0)621 181-3430
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard _______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
Hi, The windows build is linked against Octave 3.8. Normally we should just have to upgrade the Octave version to Octave 4.0.3 in the windows snapshot build system. I was not able to cross compile this version with mxe-octave last week, but it should work if we decompress the binary provided on octave website (my understanding ts that this binary is compiled with mingw, but I do not know if they provide 32bit and 64bit versions). Best, Stéphane. On 03/10/2016 09:04, Johannes Pfeifer wrote:
Thanks Michel, let me know if I can assist you. I will try to look into the failing unit tests for Octave on Linux that Houtan identified.
-----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Michel Juillard Gesendet: Montag, 3. Oktober 2016 08:57 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again)
Unless somebody has changed something recently, Dynare for Windows is not currently linked against Octave 4.0 libraries but Octave 3.8 (or even earlier)
I need to have Dynare Octave working with 4.0.3 for next week for a course.
I was able to have simple mex files working by compiling them by hand with Octave 4.0.3. I will now look into the more complex libraries.
Best
Michel
Johannes Pfeifer writes:
Hi,
I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message:
error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m
ex/octave\mjdgges.mex
I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependents -td465 0258.html). Does anyone know which library might be missing?
Best,
Johannes
------
Johannes Pfeifer
Department of Economics
University of Mannheim
L7, 3-5, Room 242
68131 Mannheim
Germany
+49 (0)621 181-3430
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard _______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Stéphane Adjemian DynareTeam
64 bit seems to be somewhat more involved: https://www.gnu.org/software/octave/doc/v4.0.3/Compiling-Octave-with-64_002d bit-Indexing.html -------- Johannes Pfeifer Friesenwall 104 50672 Köln Mobil: +49-(0)170-6936820 jpfeifer@gmx.de -----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Stéphane Adjemain Gesendet: Montag, 3. Oktober 2016 09:42 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again) Hi, The windows build is linked against Octave 3.8. Normally we should just have to upgrade the Octave version to Octave 4.0.3 in the windows snapshot build system. I was not able to cross compile this version with mxe-octave last week, but it should work if we decompress the binary provided on octave website (my understanding ts that this binary is compiled with mingw, but I do not know if they provide 32bit and 64bit versions). Best, Stéphane. On 03/10/2016 09:04, Johannes Pfeifer wrote:
Thanks Michel, let me know if I can assist you. I will try to look into the failing unit tests for Octave on Linux that Houtan identified.
-----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Michel Juillard Gesendet: Montag, 3. Oktober 2016 08:57 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again)
Unless somebody has changed something recently, Dynare for Windows is not currently linked against Octave 4.0 libraries but Octave 3.8 (or even earlier)
I need to have Dynare Octave working with 4.0.3 for next week for a course.
I was able to have simple mex files working by compiling them by hand with Octave 4.0.3. I will now look into the more complex libraries.
Best
Michel
Johannes Pfeifer writes:
Hi,
I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message:
error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m
ex/octave\mjdgges.mex
I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependent s -td465 0258.html). Does anyone know which library might be missing?
Best,
Johannes
------
Johannes Pfeifer
Department of Economics
University of Mannheim
L7, 3-5, Room 242
68131 Mannheim
Germany
+49 (0)621 181-3430
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard _______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Stéphane Adjemian DynareTeam
This webpage is about compiling Octave with 64-bit indexing (which means that matrices can have 2^64 lines or columns instead of 2^32). This is something different from compiling a 64-bit binary (though you cannot have 64-bit indexing on a 32-bit machine). Using 32-bit indexing is still the default on most 64-bit systems (at least Debian and derivatives); I don't know if the 64-bit Octave binary has 32-bit or 64-bit indexing, that should be verified. Le lundi 03 octobre 2016 à 09:44 +0200, Johannes Pfeifer a écrit :
64 bit seems to be somewhat more involved: https://www.gnu.org/software/octave/doc/v4.0.3/Compiling-Octave-with-64_002d bit-Indexing.html
-------- Johannes Pfeifer Friesenwall 104 50672 Köln Mobil: +49-(0)170-6936820 jpfeifer@gmx.de
-----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Stéphane Adjemain Gesendet: Montag, 3. Oktober 2016 09:42 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again)
Hi,
The windows build is linked against Octave 3.8. Normally we should just have to upgrade the Octave version to Octave 4.0.3 in the windows snapshot build system.
I was not able to cross compile this version with mxe-octave last week, but it should work if we decompress the binary provided on octave website (my understanding ts that this binary is compiled with mingw, but I do not know if they provide 32bit and 64bit versions).
Best, Stéphane.
On 03/10/2016 09:04, Johannes Pfeifer wrote:
Thanks Michel, let me know if I can assist you. I will try to look into the failing unit tests for Octave on Linux that Houtan identified.
-----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Michel Juillard Gesendet: Montag, 3. Oktober 2016 08:57 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again)
Unless somebody has changed something recently, Dynare for Windows is not currently linked against Octave 4.0 libraries but Octave 3.8 (or even earlier)
I need to have Dynare Octave working with 4.0.3 for next week for a course.
I was able to have simple mex files working by compiling them by hand with Octave 4.0.3. I will now look into the more complex libraries.
Best
Michel
Johannes Pfeifer writes:
Hi,
I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message:
error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m
ex/octave\mjdgges.mex
I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependent s -td465 0258.html). Does anyone know which library might be missing?
Best,
Johannes
------
Johannes Pfeifer
Department of Economics
University of Mannheim
L7, 3-5, Room 242
68131 Mannheim
Germany
+49 (0)621 181-3430
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard _______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Stéphane Adjemian DynareTeam
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Sébastien Villemot Économiste OFCE – Sciences Po
Sur le site officiel, il s'agit d'une version 32 bit Stéphane Adjemain writes:
Hi,
The windows build is linked against Octave 3.8. Normally we should just have to upgrade the Octave version to Octave 4.0.3 in the windows snapshot build system.
I was not able to cross compile this version with mxe-octave last week, but it should work if we decompress the binary provided on octave website (my understanding ts that this binary is compiled with mingw, but I do not know if they provide 32bit and 64bit versions).
Best, Stéphane.
On 03/10/2016 09:04, Johannes Pfeifer wrote:
Thanks Michel, let me know if I can assist you. I will try to look into the failing unit tests for Octave on Linux that Houtan identified.
-----Ursprüngliche Nachricht----- Von: Dev [mailto:dev-bounces@dynare.org] Im Auftrag von Michel Juillard Gesendet: Montag, 3. Oktober 2016 08:57 An: List for Dynare developers Betreff: Re: [DynareDev] Octave (again)
Unless somebody has changed something recently, Dynare for Windows is not currently linked against Octave 4.0 libraries but Octave 3.8 (or even earlier)
I need to have Dynare Octave working with 4.0.3 for next week for a course.
I was able to have simple mex files working by compiling them by hand with Octave 4.0.3. I will now look into the more complex libraries.
Best
Michel
Johannes Pfeifer writes:
Hi,
I tried master on Windows with Octave 4.03. While it used to simply crash with 4.01, I now get a proper error message:
error: dyn_first_order_solver: could not find library or dependents: C:\Users\Johannes\Dropbox\Dynare Source\GitHub\dynare\matlab\../m
ex/octave\mjdgges.mex
I infer that a linked library is not found (http://octave.1599824.n4.nabble.com/Cannot-find-library-or-dependents -td465 0258.html). Does anyone know which library might be missing?
Best,
Johannes
------
Johannes Pfeifer
Department of Economics
University of Mannheim
L7, 3-5, Room 242
68131 Mannheim
Germany
+49 (0)621 181-3430
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard _______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
_______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-- Michel Juillard
participants (5)
-
Johannes Pfeifer -
Johannes Pfeifer -
Michel Juillard -
Stéphane Adjemain -
Sébastien Villemot