7864e0ec82dcc944013e997a552d31cb533eebfe Rewrote the error message issued when the prefilter option in used while the steady state of the observed variables is non zero (introduced in commit d82252e805c007a99de353e49d1a3fa2f961d748).
================================ DYNARE MAKE CHECK MATLAB RESULTS ================================ | TOTAL: 430 | PASS: 381 | FAIL: 47 | XFAIL: 2 | XPASS: 0 | LIST OF FAILED TESTS: | * gsa/ls2003.mod | * steady_state_operator/bytecode_test.mod | * block_bytecode/ireland.mod | * block_bytecode/ramst_normcdf_and_friends.mod | * k_order_perturbation/fs2000k2_use_dll.mod | * k_order_perturbation/fs2000k_1_use_dll.mod | * k_order_perturbation/fs2000k3_use_dll.mod | * k_order_perturbation/fs2000k2_m.mod | * k_order_perturbation/fs2000k_1_m.mod | * k_order_perturbation/fs2000k3_m.mod | * k_order_perturbation/fs2000k3_p.mod | * ms-sbvar/test_ms_variances.mod | * ms-sbvar/test_ms_variances_repeated_runs.mod | * deterministic_simulations/rbc_det1.mod | * deterministic_simulations/rbc_det2.mod | * deterministic_simulations/rbc_det3.mod | * deterministic_simulations/rbc_det4.mod | * deterministic_simulations/rbc_det5.mod | * third_order/FV2011.mod | * block_bytecode/run_ls2003.m(0,1,1,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,3,0) | * block_bytecode/run_ls2003.m(0,1,4,0) | * block_bytecode/run_ls2003.m(0,1,5,0) | * block_bytecode/run_ls2003.m(0,1,6,0) | * block_bytecode/run_ls2003.m(0,1,7,0) | * block_bytecode/run_ls2003.m(0,1,8,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,2,1) | * block_bytecode/run_ls2003.m(0,1,2,2) | * block_bytecode/run_ls2003.m(0,1,2,3) | * block_bytecode/run_ls2003.m(0,1,2,4) | * block_bytecode/run_ls2003.m(0,1,2,5) | * block_bytecode/run_ls2003.m(1,1,1,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,3,0) | * block_bytecode/run_ls2003.m(1,1,4,0) | * block_bytecode/run_ls2003.m(1,1,5,0) | * block_bytecode/run_ls2003.m(1,1,6,0) | * block_bytecode/run_ls2003.m(1,1,7,0) | * block_bytecode/run_ls2003.m(1,1,8,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,2,1) | * block_bytecode/run_ls2003.m(1,1,2,2) | * block_bytecode/run_ls2003.m(1,1,2,3) | * block_bytecode/run_ls2003.m(1,1,2,4) | * block_bytecode/run_ls2003.m(1,1,2,5)
================================ DYNARE MAKE CHECK OCTAVE RESULTS ================================ | TOTAL: 428 | PASS: 281 | FAIL: 145 | XFAIL: 2 | XPASS: 0 | LIST OF FAILED TESTS: | * estimation/fs2000_mc4.mod | * estimation/fs2000_mc4_mf.mod | * estimation/fs2000_mc6.mod | * estimation/fs2000_mc6_mf.mod | * estimation/fs2000_MCMC_jumping_covariance.mod | * estimation/fs2000_initialize_from_calib.mod | * estimation/fs2000_calibrated_covariance.mod | * gsa/ls2003.mod | * example1.mod | * example2.mod | * example1_use_dll.mod | * example1_irf_shocks.mod | * example1_abs_sign.mod | * example1_macroif.mod | * t_sgu_ex1.mod | * optimal_policy/osr_example.mod | * optimal_policy/ramsey.mod | * optimal_policy/nk_ramsey.mod | * optimal_policy/nk_ramsey_expectation.mod | * optimal_policy/nk_ramsey_expectation_a.mod | * optimal_policy/mult_elimination_test.mod | * example1_varexo_det.mod | * fs2000_nonstationary.mod | * fs2000_ssfile.mod | * comments.mod | * histval_sto.mod | * expectations/expectation.mod | * expectations/expectation_ss.mod | * expectations/expectation_ss_old.mod | * expectations/expectation_nested.mod | * steady_state/multi_leads.mod | * steady_state_operator/bytecode_test.mod | * block_bytecode/ireland.mod | * k_order_perturbation/fs2000k2a.mod | * k_order_perturbation/fs2000k2_use_dll.mod | * k_order_perturbation/fs2000k_1_use_dll.mod | * k_order_perturbation/fs2000k3_use_dll.mod | * k_order_perturbation/fs2000k2_m.mod | * k_order_perturbation/fs2000k_1_m.mod | * k_order_perturbation/fs2000k3_m.mod | * k_order_perturbation/fs2000k3_p.mod | * partial_information/PItest3aHc0PCLsimModPiYrVarobsAll.mod | * partial_information/PItest3aHc0PCLsimModPiYrVarobsCNR.mod | * arima/mod1b.mod | * arima/mod2a.mod | * arima/mod2b.mod | * fs2000/fs2000.mod | * fs2000/fs2000a.mod | * fs2000/fs2000c.mod | * fs2000/fs2000d.mod | * fs2000/fs2000_cmaes.mod | * fs2000/fs2000_calib.mod | * fs2000/fs2000_analytic_derivation.mod | * fs2000/fs2000_missing_data.mod | * fs2000/fs2000_sd.mod | * fs2000/fs2000_mode_compute_8.mod | * AIM/fs2000x10L9_L.mod | * AIM/fs2000x10_L9_L.mod | * AIM/fs2000_b1L1L.mod | * AIM/fs2000_b1L1L_AIM.mod | * AIM/ls2003_2L0L.mod | * AIM/ls2003_2L0L_AIM.mod | * AIM/ls2003_2L2L.mod | * AIM/ls2003_2L2L_AIM.mod | * conditional_variance_decomposition/example1.mod | * dsge-var/simul_hybrid.mod | * dsge-var/dsgevar_forward_calibrated_lambda.mod | * dsge-var/dsgevar_forward_estimated_lambda.mod | * external_function/example1_1st_and_2nd_deriv_functions_provided.mod | * external_function/example1_1st_and_2nd_deriv_functions_provided_dll.mod | * external_function/example1_1st_deriv_function_provided.mod | * external_function/example1_1st_deriv_function_provided_dll.mod | * external_function/example1_no_deriv_functions_provided.mod | * external_function/example1_no_deriv_functions_provided_dll.mod | * seeds.mod | * identification/kim/kim2.mod | * identification/as2007/as2007.mod | * simul/example1.mod | * conditional_forecasts/fs2000_cal.mod | * conditional_forecasts/fs2000_est.mod | * recursive/ls2003.mod | * recursive/ls2003_bayesian.mod | * ms-sbvar/test_ms_variances.mod | * ms-sbvar/test_ms_variances_repeated_runs.mod | * kalman_filter_smoother/algo3.mod | * kalman_filter_smoother/algo4.mod | * kalman_filter_smoother/algo4a.mod | * kalman_filter_smoother/algo4b.mod | * kalman_filter_smoother/algoH3.mod | * kalman_filter_smoother/fs2000.mod | * kalman_filter_smoother/fs2000_1.mod | * kalman_filter_smoother/fs2000_2.mod | * kalman_filter_smoother/fs2000a.mod | * second_order/burnside_1.mod | * second_order/ds1.mod | * second_order/ds2.mod | * deterministic_simulations/rbc_det1.mod | * deterministic_simulations/rbc_det2.mod | * deterministic_simulations/rbc_det3.mod | * deterministic_simulations/rbc_det4.mod | * deterministic_simulations/rbc_det5.mod | * walsh.mod | * measurement_errors/fs2000_corr_me_ml_mcmc/fs2000_corr_ME.mod | * trend_var/fs2000_nonstationary.mod | * trend_var/fs2000_log_nonstationary.mod | * third_order/FV2011.mod | * shock_decomposition/example1_calib_shock_decomp.mod | * shock_decomposition/fs2000_est.mod | * shock_decomposition/fs2000_est_varlist.mod | * stochastic_purely_forward/stochastic_purely_forward.mod | * stochastic_purely_forward/stochastic_purely_forward_with_static.mod | * gradient/fs2000_numgrad_13.mod | * gradient/fs2000_numgrad_15.mod | * gradient/fs2000_numgrad_2.mod | * gradient/fs2000_numgrad_3.mod | * gradient/fs2000_numgrad_5.mod | * filter_step_ahead/fs2000_filter_step_ahead_bayesian.mod | * filter_step_ahead/fs2000_filter_step_ahead_ML.mod | * loglinear/example4_loglinear.mod | * block_bytecode/run_ls2003.m(0,1,0,0) | * block_bytecode/run_ls2003.m(0,1,1,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,3,0) | * block_bytecode/run_ls2003.m(0,1,4,0) | * block_bytecode/run_ls2003.m(0,1,5,0) | * block_bytecode/run_ls2003.m(0,1,6,0) | * block_bytecode/run_ls2003.m(0,1,8,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,2,1) | * block_bytecode/run_ls2003.m(0,1,2,3) | * block_bytecode/run_ls2003.m(0,1,2,4) | * block_bytecode/run_ls2003.m(0,1,2,5) | * block_bytecode/run_ls2003.m(1,1,0,0) | * block_bytecode/run_ls2003.m(1,1,1,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,3,0) | * block_bytecode/run_ls2003.m(1,1,4,0) | * block_bytecode/run_ls2003.m(1,1,5,0) | * block_bytecode/run_ls2003.m(1,1,6,0) | * block_bytecode/run_ls2003.m(1,1,8,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,2,1) | * block_bytecode/run_ls2003.m(1,1,2,3) | * block_bytecode/run_ls2003.m(1,1,2,4) | * block_bytecode/run_ls2003.m(1,1,2,5)
A full log can be found on karaba in '/tmp/dynare-master-check-csfRBo7fEv.log'.
Don't worry about these failures, they are bogus. They come from the fact that the MEX files were not compiled (because of a texinfo issue, now fixed).
Nevertheless, this shows that there are many tasks that Dynare is not able to do without the MEX files. I would not consider this a problem though.
Le jeudi 30 janvier 2014 à 22:33 +0100, Sébastien Villemot a écrit :
7864e0ec82dcc944013e997a552d31cb533eebfe Rewrote the error message issued when the prefilter option in used while the steady state of the observed variables is non zero (introduced in commit d82252e805c007a99de353e49d1a3fa2f961d748).
================================ DYNARE MAKE CHECK MATLAB RESULTS ================================ | TOTAL: 430 | PASS: 381 | FAIL: 47 | XFAIL: 2 | XPASS: 0 | LIST OF FAILED TESTS: | * gsa/ls2003.mod | * steady_state_operator/bytecode_test.mod | * block_bytecode/ireland.mod | * block_bytecode/ramst_normcdf_and_friends.mod | * k_order_perturbation/fs2000k2_use_dll.mod | * k_order_perturbation/fs2000k_1_use_dll.mod | * k_order_perturbation/fs2000k3_use_dll.mod | * k_order_perturbation/fs2000k2_m.mod | * k_order_perturbation/fs2000k_1_m.mod | * k_order_perturbation/fs2000k3_m.mod | * k_order_perturbation/fs2000k3_p.mod | * ms-sbvar/test_ms_variances.mod | * ms-sbvar/test_ms_variances_repeated_runs.mod | * deterministic_simulations/rbc_det1.mod | * deterministic_simulations/rbc_det2.mod | * deterministic_simulations/rbc_det3.mod | * deterministic_simulations/rbc_det4.mod | * deterministic_simulations/rbc_det5.mod | * third_order/FV2011.mod | * block_bytecode/run_ls2003.m(0,1,1,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,3,0) | * block_bytecode/run_ls2003.m(0,1,4,0) | * block_bytecode/run_ls2003.m(0,1,5,0) | * block_bytecode/run_ls2003.m(0,1,6,0) | * block_bytecode/run_ls2003.m(0,1,7,0) | * block_bytecode/run_ls2003.m(0,1,8,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,2,1) | * block_bytecode/run_ls2003.m(0,1,2,2) | * block_bytecode/run_ls2003.m(0,1,2,3) | * block_bytecode/run_ls2003.m(0,1,2,4) | * block_bytecode/run_ls2003.m(0,1,2,5) | * block_bytecode/run_ls2003.m(1,1,1,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,3,0) | * block_bytecode/run_ls2003.m(1,1,4,0) | * block_bytecode/run_ls2003.m(1,1,5,0) | * block_bytecode/run_ls2003.m(1,1,6,0) | * block_bytecode/run_ls2003.m(1,1,7,0) | * block_bytecode/run_ls2003.m(1,1,8,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,2,1) | * block_bytecode/run_ls2003.m(1,1,2,2) | * block_bytecode/run_ls2003.m(1,1,2,3) | * block_bytecode/run_ls2003.m(1,1,2,4) | * block_bytecode/run_ls2003.m(1,1,2,5)
================================ DYNARE MAKE CHECK OCTAVE RESULTS ================================ | TOTAL: 428 | PASS: 281 | FAIL: 145 | XFAIL: 2 | XPASS: 0 | LIST OF FAILED TESTS: | * estimation/fs2000_mc4.mod | * estimation/fs2000_mc4_mf.mod | * estimation/fs2000_mc6.mod | * estimation/fs2000_mc6_mf.mod | * estimation/fs2000_MCMC_jumping_covariance.mod | * estimation/fs2000_initialize_from_calib.mod | * estimation/fs2000_calibrated_covariance.mod | * gsa/ls2003.mod | * example1.mod | * example2.mod | * example1_use_dll.mod | * example1_irf_shocks.mod | * example1_abs_sign.mod | * example1_macroif.mod | * t_sgu_ex1.mod | * optimal_policy/osr_example.mod | * optimal_policy/ramsey.mod | * optimal_policy/nk_ramsey.mod | * optimal_policy/nk_ramsey_expectation.mod | * optimal_policy/nk_ramsey_expectation_a.mod | * optimal_policy/mult_elimination_test.mod | * example1_varexo_det.mod | * fs2000_nonstationary.mod | * fs2000_ssfile.mod | * comments.mod | * histval_sto.mod | * expectations/expectation.mod | * expectations/expectation_ss.mod | * expectations/expectation_ss_old.mod | * expectations/expectation_nested.mod | * steady_state/multi_leads.mod | * steady_state_operator/bytecode_test.mod | * block_bytecode/ireland.mod | * k_order_perturbation/fs2000k2a.mod | * k_order_perturbation/fs2000k2_use_dll.mod | * k_order_perturbation/fs2000k_1_use_dll.mod | * k_order_perturbation/fs2000k3_use_dll.mod | * k_order_perturbation/fs2000k2_m.mod | * k_order_perturbation/fs2000k_1_m.mod | * k_order_perturbation/fs2000k3_m.mod | * k_order_perturbation/fs2000k3_p.mod | * partial_information/PItest3aHc0PCLsimModPiYrVarobsAll.mod | * partial_information/PItest3aHc0PCLsimModPiYrVarobsCNR.mod | * arima/mod1b.mod | * arima/mod2a.mod | * arima/mod2b.mod | * fs2000/fs2000.mod | * fs2000/fs2000a.mod | * fs2000/fs2000c.mod | * fs2000/fs2000d.mod | * fs2000/fs2000_cmaes.mod | * fs2000/fs2000_calib.mod | * fs2000/fs2000_analytic_derivation.mod | * fs2000/fs2000_missing_data.mod | * fs2000/fs2000_sd.mod | * fs2000/fs2000_mode_compute_8.mod | * AIM/fs2000x10L9_L.mod | * AIM/fs2000x10_L9_L.mod | * AIM/fs2000_b1L1L.mod | * AIM/fs2000_b1L1L_AIM.mod | * AIM/ls2003_2L0L.mod | * AIM/ls2003_2L0L_AIM.mod | * AIM/ls2003_2L2L.mod | * AIM/ls2003_2L2L_AIM.mod | * conditional_variance_decomposition/example1.mod | * dsge-var/simul_hybrid.mod | * dsge-var/dsgevar_forward_calibrated_lambda.mod | * dsge-var/dsgevar_forward_estimated_lambda.mod | * external_function/example1_1st_and_2nd_deriv_functions_provided.mod | * external_function/example1_1st_and_2nd_deriv_functions_provided_dll.mod | * external_function/example1_1st_deriv_function_provided.mod | * external_function/example1_1st_deriv_function_provided_dll.mod | * external_function/example1_no_deriv_functions_provided.mod | * external_function/example1_no_deriv_functions_provided_dll.mod | * seeds.mod | * identification/kim/kim2.mod | * identification/as2007/as2007.mod | * simul/example1.mod | * conditional_forecasts/fs2000_cal.mod | * conditional_forecasts/fs2000_est.mod | * recursive/ls2003.mod | * recursive/ls2003_bayesian.mod | * ms-sbvar/test_ms_variances.mod | * ms-sbvar/test_ms_variances_repeated_runs.mod | * kalman_filter_smoother/algo3.mod | * kalman_filter_smoother/algo4.mod | * kalman_filter_smoother/algo4a.mod | * kalman_filter_smoother/algo4b.mod | * kalman_filter_smoother/algoH3.mod | * kalman_filter_smoother/fs2000.mod | * kalman_filter_smoother/fs2000_1.mod | * kalman_filter_smoother/fs2000_2.mod | * kalman_filter_smoother/fs2000a.mod | * second_order/burnside_1.mod | * second_order/ds1.mod | * second_order/ds2.mod | * deterministic_simulations/rbc_det1.mod | * deterministic_simulations/rbc_det2.mod | * deterministic_simulations/rbc_det3.mod | * deterministic_simulations/rbc_det4.mod | * deterministic_simulations/rbc_det5.mod | * walsh.mod | * measurement_errors/fs2000_corr_me_ml_mcmc/fs2000_corr_ME.mod | * trend_var/fs2000_nonstationary.mod | * trend_var/fs2000_log_nonstationary.mod | * third_order/FV2011.mod | * shock_decomposition/example1_calib_shock_decomp.mod | * shock_decomposition/fs2000_est.mod | * shock_decomposition/fs2000_est_varlist.mod | * stochastic_purely_forward/stochastic_purely_forward.mod | * stochastic_purely_forward/stochastic_purely_forward_with_static.mod | * gradient/fs2000_numgrad_13.mod | * gradient/fs2000_numgrad_15.mod | * gradient/fs2000_numgrad_2.mod | * gradient/fs2000_numgrad_3.mod | * gradient/fs2000_numgrad_5.mod | * filter_step_ahead/fs2000_filter_step_ahead_bayesian.mod | * filter_step_ahead/fs2000_filter_step_ahead_ML.mod | * loglinear/example4_loglinear.mod | * block_bytecode/run_ls2003.m(0,1,0,0) | * block_bytecode/run_ls2003.m(0,1,1,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,3,0) | * block_bytecode/run_ls2003.m(0,1,4,0) | * block_bytecode/run_ls2003.m(0,1,5,0) | * block_bytecode/run_ls2003.m(0,1,6,0) | * block_bytecode/run_ls2003.m(0,1,8,0) | * block_bytecode/run_ls2003.m(0,1,2,0) | * block_bytecode/run_ls2003.m(0,1,2,1) | * block_bytecode/run_ls2003.m(0,1,2,3) | * block_bytecode/run_ls2003.m(0,1,2,4) | * block_bytecode/run_ls2003.m(0,1,2,5) | * block_bytecode/run_ls2003.m(1,1,0,0) | * block_bytecode/run_ls2003.m(1,1,1,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,3,0) | * block_bytecode/run_ls2003.m(1,1,4,0) | * block_bytecode/run_ls2003.m(1,1,5,0) | * block_bytecode/run_ls2003.m(1,1,6,0) | * block_bytecode/run_ls2003.m(1,1,8,0) | * block_bytecode/run_ls2003.m(1,1,2,0) | * block_bytecode/run_ls2003.m(1,1,2,1) | * block_bytecode/run_ls2003.m(1,1,2,3) | * block_bytecode/run_ls2003.m(1,1,2,4) | * block_bytecode/run_ls2003.m(1,1,2,5)
A full log can be found on karaba in '/tmp/dynare-master-check-csfRBo7fEv.log'. _______________________________________________ Dev mailing list Dev@dynare.org https://www.dynare.org/cgi-bin/mailman/listinfo/dev
-
sebastien＠dynare.org -
Sébastien Villemot